131
CVP-202
Z
Select the track to be edited.
............................................................
Select the track whose parameters you wish to change by pressing
the
TRACK
<
or
>
button. If
TOTAL
is selected, any changes will
affect the entire song rather than an individual track.
X
Select the parameters to be changed.
....................................
Select the parameters to be changed by pressing the
SELECT
▼
or
▲
button.
The following parameters can be changed in the INITIAL EDIT
display. Refer to the indicated page for details on each parameter.
Parameters which can be changed with Initial Edit:
●
When track 1 — 16 is selected:
• VOLUME (See page 32.)
• VOICE (See page 29.)
• PAN (See page 32.)
• REVERB DEPTH (See page 43.)
• CHORUS DEPTH (See page 45.)
• EFFECT DEPTH (See page 48.)
●
When TOTAL is selected:
• TEMPO (See page 25.)
• Overall REVERB DEPTH (See page 42.)
• REVERB TYPE (See page 42.)
• CHORUS TYPE (See page 44.)
• EFFECT TYPE (See page 47.)
• The Program Change Number (PRG#),
Bank LSB (BKL), and Bank MSB (BKM)
parameters, which are used to select
voices via MIDI, are displayed when
VOICE is selected.
Making Settings in the INITIAL EDIT Display
129
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Other Record Edit Functions
The current parameter value for the
selected track.
The parameter to
be changed.
The selected track
is highlighted.
C
Change the settings.
..................................................................................
Use the data dial or
[–]
and
[+]
buttons to change the settings. You
can instantly check the effect of the changes, since the settings can be
changed during playback.
• If TOTAL is selected and the value of
the reverb depth is changed, the new
setting will also affect the keyboard
sound.
• The voices of the tracks to which Auto
Accompaniment, rhythm and/or Har-
mony data have been recorded, can
also be changed.
• The data may not be played back
accurately if you use the [REW] button
while editing the data.
