Yamaha Clavinova CVP-202, Руководство пользователя

Страница: 11 / 178

11
CVP-202
Z
Connect the power cord.
Insert the plugs at the ends of the cord, one into the AC INLET on the
bottom panel of the Clavinova, and the other into a standard AC outlet.
In some areas, a plug adapter may be provided to match the pin con-
figuration of the AC wall outlets in your area.
X
Press the [POWER] switch.
The main display appears in the LCD display. (Initially, the voice
GrandPiano 1 and the accompaniment style 60’sGtrPop are
selected.) The power lamp below the lower left end of the keyboard
also lights.
C
Adjust the LCD.
If the LCD is difficult to read, adjust the contrast with the [CON-
TRAST] knob at the left of the LCD.
V
Adjust the volume.
Use the [MASTER VOLUME] slider to adjust the volume to an ap-
propriate level.
●
When you’re ready to turn off the power, press the [POWER] switch
again. Both the LCD display and the power lamp below the left end
of the keyboard will turn off.
Connect a set of stereo headphones (optional) to the [PHONES] jack.
When headphones are connected, the internal speaker system is auto-
matically shut off. Since the Clavinova has two PHONES jacks, two sets
of headphones can be used simultaneously, allowing two people to enjoy
listening to the performance.
■
Using the Headphone Hanger:
............................................................
A headphone hanger is included in the CVP-202 package so that you
can hang the headphones on the Clavinova. Install the headphone hanger
using the included two screws (4 x 10mm) as shown in the figure.
CAUTION
• Do not hang anything other than the headphones on the hanger. Otherwise,
the Clavinova or the hanger may be damaged.
Standard stereo
phone jacks
Your Clavinova is equipped with a variety of jacks and terminals that
let you connect it to other audio and MIDI equipment. These connectors
are located at the left end of the unit on the rear panel.
You can connect other instruments that you want to play through the
Clavinova’s speakers to the AUX IN jacks, or output the Clavinova’s
sound to external speakers using the AUX OUT jacks. Use the MIDI
terminals if you want the Clavinova to control — or be controlled by —
another MIDI instrument. There’s even a TO HOST terminal that lets
you connect the Clavinova directly to a personal computer.
Be sure to turn the power off when connecting or disconnecting other
equipment. See the instructions in Chapter 9 of this manual for details.
Turning the Power On and Off
Headphones
Other Connections
PHONES
THRU OUT IN
MIDI
HOST SELECT
MIDI Mac
PC-1
PC-2
TO HOST PEDAL
AUX IN
R R
AUX OUT
L/L + R L/L + R
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Setting Up the Clavinova
9
MASTER
VOLUME ACMP/SONG
VOLUME
MAX
MIN
MAX
MIN
VOLUME
POWER
CONTRAST
PHONES