100
CVP-202
Z
Select the track to be changed.
........................................................
Select the desired track by pressing
TRACK
<
or
>
. Selecting
TO-
TAL
will change the overall settings of the song rather than the settings
of individual tracks.
Press the rightmost LCD button to select
PLAY
(playback),
OFF,
or
SOLO
for the selected track. Select
SOLO
if you want to play only the
selected track.
Changing Settings in the MIXER Display
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Song Playback
98
To adjust the playback volume, voice, and pan settings, as well as the
reverb, chorus, and effect depth for individual tracks, press the
[MIXER]
button while in the Song Play mode to call up the MIXER display.
Adjustment of Track Settings
You can use the MIXER display to set the parameters listed below.
See the indicated reference pages for descriptions of each parameter.
Parameters available in the MIXER display
●
When track 1 — 16 is selected:
• VOLUME (See page 32.)
• VOICE (See page 29.)
• PAN (See page 32.)
• REVERB DEPTH (See page 43.)
• CHORUS DEPTH (See page 45.)
• EFFECT DEPTH (See page 48.)
●
When TOTAL is selected:
• TEMPO (See page 25.)
• Overall REVERB DEPTH (See page 42.)
• REVERB TYPE (See page 42.)
• CHORUS TYPE (See page 44.)
• EFFECT TYPE (See page 47.)
The Program Change Number (PRG#),
Bank LSB (BKL), and Bank MSB (BKM)
parameters, which are used to select
voices via MIDI, are displayed when
VOICE is selected.
Depending on the file type, some param-
eters cannot be changed. For such pa-
rameters, a “Fixed” indication is shown.
MIXER
FUNCTION
