156
CVP-109/107/105/700
■
Applying Aftertouch to All Notes
.......................................................
Aftertouch Data
Range: 0 — 127
Select the Channel Aftertouch event you want to edit in the event list
for the appropriate track (
1
through
16
).
➔
The
DATA
function is displayed above the fourth LCD button.
➾
Use the
DATA
button to select the channel aftertouch data param-
eter, then use the data dial or the [–] and [+] buttons to change the
value of this parameter.
■
Applying Aftertouch to Individual Notes
..................................
Select the Polyphonic Aftertouch event you want to edit in the event
list for the appropriate track (
1
through
16
).
DATA function
➔
The
NOTE NUMBER
and
DATA
functions are displayed above the
third and fourth LCD buttons.
Each Polyphonic Aftertouch event is defined by two pieces of data (in
addition to the timing, which is described on page 150).
●
Note Number
Polyphonic Aftertouch
event functions
Note Number
• Settings: C–2 — G8
The note number setting determines which note is affected by the
aftertouch event. Use the
NOTE NUMBER
button to select this param-
eter, then use the data dial or the [–] and [+] buttons to change the note
number.
Channel aftertouch
data
Note number
Polyphonic
aftertouch data
154
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Step Edit
The internal tone generator of the CVP-
109/107/105/700 does not support poly-
phonic aftertouch. Although the Step Edit
function lets you add polyphonic
aftertouch data to a song (e.g., for use by
other MIDI instruments), this data will not
affect playback by the CVP-109/107/105/
700.
