Assembling the Clavinova
133
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual
6.
Rotate the adjuster until it comes in
firm contact with the floor surface.
7.
Attach the headphone hanger.
Attach the headphone hanger using two thin
screws (4 x10 mm) as shown in the illustration.
8.
If desired, you can attach the AC
adaptor to the bottom of the unit by
using the adaptor holders.
For specific instructions, refer to the leaflet
enclosed with the adaptor holders.
4 × 10 mm thin scre
w
s
Transporting
If you move to another location, you can transport
the instrument along with other belongings. You can
move the unit as it is (assembled) or you can
disassemble the unit down to the condition it was in
when you first took it out of the box. Transport the
keyboard horizontally. Do not lean it up against a
wall or stand it up on its side. Do not subject the
instrument to excessive vibration or shock. When
transporting the assembled instrument, make sure all
screws are properly tightened and have not been
loosened by moving the instrument.
AC adaptor
4 × 10 mm
thin scre
w
s
Содержание Clavinova CLP- 785
Страница 143: ...143 MEMO CLP 785 CLP 775 CLP 745 CLP 735 CLP 795GP CLP 765GP Owner s Manual ...
Страница 148: ......