System Menu
100
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual
MIDI
Initial Setup
Cancel
Transmits the current panel settings such as Voice
selection to a connected MIDI device or computer.
Before you start recording your performance to a
connected MIDI device or computer, execute this
operation to record the current panel settings at the
beginning of your performance data. It causes that the
same panel settings are called up when the recorded
performance is played back.
Operation:
Move the highlight to “Execute,” then press the [>] button
to transmit the panel settings as MIDI messages.
–
–
Execute
Backup
Backup Setting
–
For instructions about these functions, refer to pages 104
– 105.
–
–
Backup
–
Restore
–
Factory Reset
–
Utility
USB Format
Cancel
This lets you format or initialize the USB flash drive
connected to the USB [TO DEVICE] terminal.
NOTICE
Exec
u
ting the Format operation
w
ill delete all data sa
v
ed in the
USB flash dri
v
e. Sa
v
e important data to a comp
u
ter or another
storage de
v
ice.
NOTE
When connecting the USB flash drive to the USB
[TO DEVICE] terminal, a message prompting you to execute
the Format operation may appear. If such a case occurs,
execute the Format operation.
Operation
Move the highlight to “Execute,” then press the [>] button
to start the Format operation. After Formatting is
completed, a message appears then the instrument
returns to the Utility display after a while.
NOTICE
N
e
v
er t
u
rn off the po
w
er or disconnect the USB flash dri
v
e
w
hile “Exec
u
ting” is sho
w
n in the display.
–
–
Execute
USB Properties
–
Shows the amount of free space and entire memory in
the USB flash drive connected to the USB [TO DEVICE]
terminal.
–
–
USB Autoload
–
When this is set to “On,” the Song saved in the root
directory can be selected (shown on the display)
automatically as soon as the USB flash drive is
connected to the USB [TO DEVICE] terminal.
Off
On, Off
Speaker
(Setting
display)
Lets you switch the speaker on/off.
•
N
ormal:
The speaker will sound only if headphones are
not connected.
•
On:
The speaker will always sound.
•
Off:
The speaker will not sound.
NOTE
When this setting is on, “Binaural” (page 99) will always be
disabled.
Normal
Normal, On, Off
To call up the desired parameter:
Press the [FU
N
CTIO
N
]
bu
tton se
v
eral times to select “System” men
u
, then
u
se
the [
u
]/[
d
]/[<]/[>]
bu
ttons to select the desired parameter.
[>]
[<]
[>]
[<]
[>]
[<]
Description
Default setting
Setting range
7
8
5
775
745
735
795GP
765GP
Amount of
free space
Amount of
entire memory
Содержание Clavinova CLP- 785
Страница 143: ...143 MEMO CLP 785 CLP 775 CLP 745 CLP 735 CLP 795GP CLP 765GP Owner s Manual ...
Страница 148: ......