Setting Up
11
CLP-525 Owner’s Manual
1.
Connect the plugs of the AC power adaptor in the order
shown in the illustration.
WARNING
• Use the specified adaptor (page 32) only. The use of other adaptors may result in irreparable
damage to both the adaptor and the instrument.
• The AC power adaptor is designed for indoor use only. Do not use in any wet environments.
CAUTION
Remove the AC plug from the AC outlet when the instrument is not to be used for extended
periods of time, or during electrical storms.
NOTE
Follow this procedure in reverse order when disconnecting the power adaptor.
2.
Press the [
P
] (Standby/On) switch to turn the power on.
Power indicator
If you close the key cover without turning the power to standby, the power
indicator remains lit, indicating that the power is still on.
When you’re ready to turn the power to standby, press the [
P
] (Standby/On)
switch again for a second. The power indicator turns off.
CAUTION
Even when the [
P
] (Standby/On) switch is in the standby status, electricity is still flowing to the
instrument at a minimum level. When not using the instrument for an extended period of time, be
sure to unplug the power cord from the wall AC outlet.
Turning the Power On
1-1
1-2
1-3
Po
w
er cord
AC o
u
tlet
AC po
w
er
adaptor
DC IN jack (page 9)
The shape of the pl
u
g and o
u
tlet
differ depending on locale.
Po
w
er indicator
[
P
] (Stand
b
y/On) s
w
itch
Содержание Clavinova CLP-525
Страница 34: ...MEMO ...
Страница 36: ......