background image

42

Advanced Functions

Handling Song Files

1.

Select a User Song.

Press the [SONG SELECT] button so that the USER MIDI lamp lights, 
then use the [-/NO]/[+/YES] buttons to select the User Song to be copied.

2.

Call up the File mode.

Press the [FILE] button so that the COPY TO USB lamp lights. 

3.

Select a User Song number as destination after copying.

Hold down the [FILE] button then use the [-/NO]/[+/YES] buttons to 
select the User Song number (U.00 – U.99). When you select a Song 
number containing data, three dots (like “U.x.x” ) are shown in the display. 
To overwrite the selected Song, go to step 4. To avoid overwriting, select 
another Song then go to step 4. 

4.

Copy the Song.

If an empty Song is selected in step 3, release the [FILE] button then press 
the [+/YES] button. If a Song containing data is selected in step 3, release 
the [FILE] button then press the [+/YES] button twice. This operation 
starts the Copy operation. When the Copy is completed, “End” will appear 
followed by “---” in the display. 

To cancel the Copy operation, press the [-/NO] button in response to “n y” 
or “n¯y.”

NOTICE

When dashes appear in the display in succession, do not turn off the power of the instrument or 
disconnect the USB storage device.

5.

Exit from the File mode.

Press the [FILE] button several times until its lamp is turned off.

Copying User Songs in the instrument to a USB storage 
device

1

2 3 5

3

1

4

NOTE

If the “_ _ _” flashes indicating that 
the User Song is not selected in 
step 1, press the [FILE] button 
several times until its lamp is 
turned off, then return to step 1 to 
select a User Song.

NOTE

Preset Songs and protected MIDI 
Songs cannot be copied to the 
USB storage device. If you try to 
copy such a Song, “Pro” appears 
in the display. 

NOTE

When there is insufficient free 
memory capacity in the USB 
storage device, the copied Song 
cannot be saved. To ensure 
sufficient memory, try erasing 
unnecessary files (page 43). 

Содержание Clavinova CLP- 430

































































































Отзывы: