Appendix
CGP-1000 Owner’s Manual
210
Removing the CGP-1000 from its Case and Assembling the Unit
CAUTION
• Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please assemble in accordance with
the sequence given below.
• Assembly should be carried out by at least four persons.
• Be sure to use the correct screw size, as indicated below. Use of incorrect screws can damage the instrument.
• Be sure to tighten all screws upon completing the assembly of each unit.
• To disassemble, reverse the assembly sequence given below.
1
Remove the parts shown below from the box.
2
Remove the brackets
Unscrew the brackets.
3
Attach the right front and rear legs.
1
Attach and securely tighten the right front leg with
the 70mm hexagon bolts.
2
Attach and securely tighten the rear leg with the
92mm hexagon bolts.
Have a Phillips (+) screwdriver and a hexagonal wrench ready.
1
2
3
5
4
6
1
Cut the bands.
2
Remove the top cover.
3
Remove the front screws.
4
Remove the side screws.
5
Pull off the cover.
6
Remove the parts.
Leg
×
3
70mm hexagon bolt
×
4
92mm hexagon bolt
×
2
Pedal
4.0
×
20mm screw
×
4
Pedal brace rod
×
2
AC power cord
Содержание Clavinova CGP-1000
Страница 1: ...EN C G P 1 0 0 0 O W N E R S M A N U A L ...