Yamaha Clavinova CGP-1000, Руководство пользователя

Страница: 126 / 226

Using, Creating and Editing the
A
uto
Accompaniment Styles
Style Creator
CGP-1000 Owner’s Manual 126
Editing Data for Each Channel (CHANNEL)
The explanation here applies when you select the CHANNEL tab in step 4 of
“Basic Operation for Editing Styles” (page 123).
1
Press the [A]/[B] button to select the edit menu (see below).
2
Use the [1
π π
π π†
†
† † ]/[2
π π
π π†
†
† † ] (CHANNEL) buttons to select the channel to
be edited.
The selected channel is shown at the upper left of the display.
3
Use the [4
π π
π π†
†
† † ]–[8
π π
π π†
†
† † ] buttons to edit the data.
For details on editable parameters, see below.
4
Press the [D] (EXECUTE) button to actually enter the edits for each
display.
After the operation is completed, you can execute the edition and this but-
ton changes to [UNDO], letting you restore the original data if you’re not
satisfied with the results of the edit. The Undo function only has one level;
only the previous operation can be undone.
5
Press the [I] (SAVE) button to call up the Style Selection display to
save your data.
Save the data in the Style Selection display (page 69).
1
2 3
5
4
CAUTION
The edited Style will be lost if
you change to another Style
or you turn the power off
without executing the save
operation.
QUANTIZE Same as in the Song Creator (page 161), with the exception of the two
additional available parameters below.
Eighth notes with swing
Sixteenth notes with swing
VELOCITY
CHANGE Boosts or cuts the velocity of all notes in the specified channel, accord-
ing to the percentage specified here.
BAR COPY
This function allows data to be copied from one measure or group of
measures to another location within the specified channel. SOURCE
specifies the first (TOP) and last (LAST) measures in the region to be
copied. DEST specifies the first measure of the destination location, to
which the data is to be copied.
BAR CLEAR This function clears all data from the specified range of measures within
the selected channel.
REMOVE EVENT This function lets you remove specific events from the selected channel.
C
C