Yamaha CLAVINOVA C L P - 3 8, Руководство пользователя

Страница: 98 / 136

Other settings [FUNCTION]
CLP-380 Owner’s Manual
98
Detailed Settings
This turns the auxiliary pedal function on or off for the
relevant voice part. In other words, you can select the
desired voice part (Main, MainLayer, Left, LeftLayer) and
determine whether the auxiliary pedal function (set on
page 97) will affect that part or not.
See the procedure on page 80.
Setting for:
Main, MLayer (MainLayer), Left, LLayer (LeftLayer)
Setting range:
On/Off
Normal Setting:
Different for each voice.
If you assign the SONG PLAY/PAUSE function to a pedal and turn the
function On, the pedal function assigned to the pedal in the Function
menu (pages 96 and 97) is disabled.
See the procedure on page 80.
Setting for:
Left, Center, AUX
Setting range:
On/Off
Normal setting:
Off for all pedals
A pedal connected to the [AUX PEDAL] jack may switch
on and off differently. For example, some pedals turn on
the effects and others turn them off when you press them.
Use this parameter to reverse this mechanism.
See the procedure on page 80.
Setting range:
Make, Break
Here you can specify the point to which you must depress
the pedal (right and AUX) before the assigned effect
begins to be applied. This setting applies only to the
“SustainCont” effect (page 96) that is assigned to the
right or AUX pedal.
Setting range:
-2 (effective with the shallowest press) – 0 – +2 (effective with the
deepest press)
See the procedure on page 80.
Setting range:
1 – 10
Turning the auxiliary pedal function
on/off
[AuxPedalOnOff]
Assigning the SONG [PLAY/PAUSE]
function to the pedal
[PedalPlay/Pause]
B
D
NO YES
A
C
AuxPedalOnOff Set?-->
Main On
Select on or off.
Select the voice part for which
the AUX pedal on/off setting is
to be changed.
TIP
B
D
NO YES
A
C
PedalPlay/Pause
Center Off
Select a pedal to assign
the function Select on or off.
Selecting a type of auxiliary pedal
[AuxPedalType]
Setting the point at which the damper
pedal starts to affect the sound
[HalfPedalPoint]
Adjusting the depth of the Soft pedal
[SoftPedalDepth]
B
D
NO YES
A
C
AuxPedalType
Make
B
D
NO YES
A
C
HalfPedalPoint
0
B
D
NO YES
A
C
SoftPedalDepth
5