Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
137
Reference Manual
2
3
6
Channel number
Displays the channel number and channel name of the channel to be inserted.
7
man/auto/mute
Toggles between man/auto/mute.
man: Passes the audio through without changing the gain. This mode is used for
singing with a mic.
auto: Turns on Automixer. This mode is used for conversations.
mute: Mutes channels.
8
preset
Selects the channel mode (man/auto/mute) when the PRESET button in the master field
is pressed. The preset button lights when a preset is programmed for a channel.
◆
Master field
Editing the internal effects
The internal effects of the CL series console can be mounted in EFFECT racks 1-8, and
patched to an output channel's output or input channel's input, or inserted into a channel. For
each effect mounted in a rack, you can choose one of 54 types of effect.
With the default settings, the signals from MIX channels 17-24 are input to racks 1-8, and from
the racks are then output to ST IN 1-8 (L/R).
NOTE
Some effect types can be mounted only in racks 1, 3, 5 or 7.
To use an internal effect via send and return, assign the output of a MIX channel to the input
of the effect, and assign the output of the effect to an input channel. In this case, the
corresponding output channel is used as a master channel for the effect send, and the input
channel is used as an effect return channel.
Rack 1
1
1
OVERRIDE/PRESET/MUTE
Makes settings for each group (a/b/c) selected in the channel control field. Shows only
the selected group.
• OVERRIDE
When you press this button, channels where the channel override button is on will
fade in to 0 dB (unity gain). All channels with the override button turned off will be
Alternatively, you can assign the input and output of the internal effect to the insert-out/in of a
desired channel (except for a ST IN channel), so that the effect is inserted into that channel.
muted.
• PRESET
Insert-out of a
desired channel*
EFFECT
When you press this button, each channel will switch to the mode indicated by the
mode button (man/auto/mute) next to the lit preset indicator.
• MUTE
When you press this button, all channels will fade out immediately (0.5 seconds).
2
meters
Switches the meter indicator in the channel control field. Toggles between gain, input,
and output each time you press the button.
NOTE
Meters should normally be set in gain mode.
3
reset
Initializes the Automixer settings.
* Excluding a ST IN channel
The internal effects fall into two categories;
“STEREO type” (2-in/2-out) effects that process
the L/R channel input signals independently, and
“MIX type” (1-in/2-out) effects that mix the
two channels before processing them.
If signals are assigned to both the L and R inputs of an effect, the way in which the L/R
channels are processed will depend on whether a Stereo effect type or a Mix effect type is
selected, as follows.
Input of the input
channel
Output of the
output
channel
Insert-in of a
desired channel*
INP
UT
PA
T
CH
OUT
P
U
T
PA
T
C
H
EFFECT
Rack 2
EFFECT
Rack 7
EFFECT
Rack 8
EFFECT
USO
RESTRITO
Содержание CL5
Страница 257: ...Data List USO RESTRITO ...
