Yamaha CL5, Справочное руководство

Страница: 129 / 306

126 Reference Manual
Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
4
INPUT PATCH button
If the type is EFFECT, two buttons (L/R) will appear. If the type is Flex15GEQ or
8BandPEQ, two buttons (A/B) will appear. If the type is 31BandGEQ, one button will
appear.
Press this button to open the CH SELECT window, in which you can select the path of
the signal patched to the rack input.
The categories and channels that can be selected are shown below.
•
OUT CH .................................... MIX 1-24, MATRIX 1-8
*1
•
ST/MONO ................................. STEREO L/R, MONO
*1
•
INSERT 1 OUT 1-32 ................. CH1-32
*1
•
INSERT 1 OUT 33-64 ............... CH33-64
*1
•
INSERT 1 OUT 65-72 ............... CH65-72
*1
•
INSERT 1 OUT MIX/MATRIX .... MIX 1-24, MATRIX 1-8
•
INSERT 1 OUT ST/MONO ........ STEREO L/R, MONO
•
INSERT 2 OUT 1-32 ................. CH1-32
*1
•
INSERT 2 OUT 33-64 ............... CH33-64
*1
•
INSERT 2 OUT 65-72 ............... CH65-72
*1
•
INSERT 2 OUT MIX/MATRIX .... MIX 1-24, MATRIX 1-8
•
INSERT 2 OUT ST/MONO ........ STEREO L/R, MONO
*1. Not displayed for GEQ 9-16 RACK.
NOTE
• In the case of the CL3/CL1, channels that do not exist on those models will not be shown.
• In the case of the GEQ or PEQ, patching it to either an insert-out or insert-in will automatically
assign the other patch point to the same rack. Also, insert mode will automatically be switched
on. Additionally, if you defeat the insert-out or insert-in of a GEQ or PEQ, the other patch point
will automatically be defeated and at the same time insert mode will automatically be switched off.
• For effects, if you select “DYNAMICS&EQ” for EFFECT TYPE, the operation is the same as for
GEQ above.
• For PREMIUM RACK, the operation is the same as for GEQ above.
• For more information on insert-in/out, refer to “
Inserting an external device into a channel
”
( page 20 ).
5
OUTPUT PATCH button
If the type is EFFECT, two buttons (L/R) will appear. If the type is Flex15GEQ or
8BandPEQ, two buttons (A/B) will appear. If the type is 31BandGEQ, one button will
appear.
Press this button to open the CH SELECT window, in which you can select the path of
the signal patched to the rack output.
The categories and channels that can be selected are shown below.
•
CH1-32 ................................... CH1-32
*1
•
CH33-64 ................................. CH33-64
*1
•
CH65-72 ................................. CH65-72
*1
•
INSERT 1 IN 1-32 .................. CH1-32
*1
•
INSERT 1 IN 33-64 ................ CH33-64
*1
•
INSERT 1 IN 65-72 ................ CH65-72
*1
•
INSERT 1 IN MIX/MATRIX .... MIX 1-24, MATRIX 1-8
•
INSERT 1 IN ST/MONO ......... STEREO L/R, MONO
•
INSERT 2 IN 1-32 .................. CH1-32
*1
•
INSERT 2 IN 33-64 ................ CH33-64
*1
•
INSERT 2 IN 65-72 ................ CH65-72
*1
•
INSERT 2 IN MIX/MATRIX .... MIX 1-24, MATRIX 1-8
•
INSERT 2 IN ST/MONO ......... STEREO L/R, MONO
*1. Not displayed for GEQ 9-16 RACK.
NOTE
• In the case of the CL3/CL1, channels that do not exist on those models will not be shown.
• If you use CL5 settings data on the CL3/CL1, or CL3 settings data on the CL1, buttons will be
shown crossed-out if they are assigned to a channel that does not exist on that model.
USO
RESTRITO