manualshive.com logo in svg

Yamaha CEmarking RCX221, Руководство пользователя

Поделиться
Скачать
Yamaha CEmarking RCX221 Скачать руководство пользователя страница 317

4-249

Chapter

4

OPERA

TION

12. "SYSTEM" mode

12.6.1.3 Deleting  files

The data stored on an SD memory card can be deleted if needed.

n

NOTE

Subdirectories cannot be deleted.

c

CAUTION

Do not remove the SD memory card while a fi le is being deleted from it. 

[Procedure]

1) In "SYSTEM>BACKUP>SD CARD" mode, select the file to be deleted using the cursor 

up/down (

↑

/

↓

) keys.

2) Press 

 (DEL).

3) A confirmation message appears.

■

  Deleting a file

  FILE1   .ALL  102520  06/04/07 13:30

SYSTEM

>BACKUP>SDCARD

V9.00

Erase file OK?

YES  

 

  NO

4) Press 

 (YES) to delete the file.

The message "0.5: Accessing" will appear during deletion.

Содержание CEmarking RCX221





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды