Yamaha CEmarking RCX221, Руководство пользователя

Страница: 199 / 468

4-131
Chapter
4
OPERA
TION
11. "MANUAL" mode
11.6.1 Editing hand definitions
[Procedure]
1) Press (EDIT) in "MANUAL>HAND" mode.
2) Use the cursor (
↑
/
↓
) keys to select the hand definition you want to edit.
An edit cursor appears at the left end of the selected hand definition line.
■
Hand editing screen (1)
MANUAL >HAND>EDIT 50% [MG][S0H1X]
————————————1———————2———————3———————4———
H0 = 0 0.00 0.00
H1 = _ 0.00 100.00 0.00 R
H2 = 90.00 100.00 100.00 R
H3 = 8000 100.00 100.00
[POS] 600.00 0.00 0.00 0.00
UNDO
3) Use the cursor (
←
/
→
) key to move the cursor to the position you want to edit.
4) Use to , , , , , and to enter the data.
■
Hand editing screen (2)
MANUAL >HAND>EDIT 50% [MG][S0H1X]
————————————1———————2———————3———————4———
H0 = 0 0.00 0.00
H1 = 45.00 300 100 R_
H2 = 90.00 100.00 100.00 R
H3 = 8000 100.00 100.00
[POS] 600.00 0.00 0.00 0.00
UNDO
5) Pressing or cursor up/down (
↑
/
↓
) keys completes the hand definition
settings.
Press if you want to cancel the settings.
6) To continue editing, repeat steps 2) to 4).