Yamaha CDC-506 Скачать руководство пользователя страница 12

Страница: 12 / 50

CDC-585/CDC-506/CDC-685/CDC-906

CDC-585/CDC-506

CDC-685/CDC-906

FUNCTION

Tray open/close.

Rotating the mode of coefficients. (Coefficient mode

➝

Coefficient setting

➝

Product mode) Press-

ing twice will set to the product mode.

Plays if focus servo is effective. TRON, MUTE OFF.

All stop. (Focus, spindle, feed, laser, tray, etc.) Initializes FL display.

Backward traverse move. (If inner SW turns on, traverse is stopped.)

(Coefficient set up mode : upper digit down.)

Forward traverse move.

(Coefficient set up mode : upper digit up.)

Returns to product mode. (Tray and table inoperative.)

Adjustment mode 1 (TR-offset, FO-offset, FO-rough gain adjustment)

Adjustment mode 2 (TR-balance, TR-rough gain adjustment)

Adjustment mode 3 (FO-fine gain, TR-fine gain, FO-balance adjustment)

—

Decelerates or stops spindle.

Output level down.

(Coefficient set up mode : address down.)

Output level up.

(Coefficient set up mode : address up.)

—

Returns to product mode. (tray and table inoperative.)

Adjustment mode 1 (TR-offset, FO-offset, FO-rough gain adjustment)

Adjustment mode 2 (TR-balance, TR-rough gain adjustment)

Adjustment mode 3 (FO-fine gain, TR-fine gain, FO-balance adjustment)

Turn table turns counterclockwise. (Slow speed)

Turn table turns clockwise. (Slow speed)

Turn table turns counterclockwise. (Fast speed)

Turn table turns clockwise. (Fast speed)

Backward 10 TRACK KICK-continuously

Forward 10 TRACK KICK-continuously

PANEL KEY

OPEN/CLOSE

PLAYXCHANGE

PLAY/PAUSE

STOP

SKIP

DISC 1

DISC 2

DISC 3

DISC 4

DISC 5

PROG

OUTPUT LEVEL –

OUTPUT LEVEL +

+10

(Note 1)

■

TEST MODE

●

Starting TEST mode

Test mode is started when the power is turned on while the “PLAY/PAUSE” and “STOP” keys on the panel

are simultaneously pressed and held.

When the test mode is started, all the displays light up for about 1 second. ("TEST" on display)

NOTE : To fully operate all test modes the remote control must be used.

●

Function List of Panel keys

Note: “traverse servo” means the same as “feed servo”

CDC-685/
CDC-906
ONLY

(Note 1)

When the disc table is not positioned correctly, be sure to turn the disc table one full rotation by using the
DISC SKIP key on the remote control unit before canceling the TEST mode.

www. xiaoyu163. com

QQ 376315150

TEL 13942296513

TEL 13942296513 QQ 376315150 892498299

http://www.xiaoyu163.com

Содержание CDC-506



















































Результаты поиска

Содержание CDC-506

Отзывы:

Похожие инструкции для CDC-506

Бренды по названию

Популярные бренды

Yamaha CDC-506, Руководство по обслуживанию

Результаты поиска

Содержание CDC-506

Отзывы:

Похожие инструкции для CDC-506

Бренды по названию

Популярные бренды