Yamaha CD Recordable/Rewritable Drive CRW3200 страница 36 Скачать руководство пользователя | Manualshive

Страница: 36 / 50

background image

28

Troubleshooting

1

The CRW3200E drive is not turned on.
(The front panel LED does not light.)

●

Is the computer turned on?

Turn on the computer.

●

Is the 4-pin internal power cable connected properly to the CRW3200E drive?

Turn off the computer, and remove the computer cover. Check that the

connector of the 4-pin internal power cable is connected to the CRW3200E
drive in the correct direction, and that the 4-pin internal power cable is fully

connected. (P. 9, 21)

●

If the CRW3200E drive is connected to another 4-pin internal power cable that
properly conducts power to another device, is the CRW3200E drive turned on?

Turn off the computer. Be sure that the CRW3200E drive is connected to

another 4-pin internal power cable that properly conducts power to another
device, and check that the CRW3200E drive is turned on when turning on the

computer. (P. 9, 21)

If the drive is turned on, the computer’s power unit may be damaged.

If the drive is not turned on, contact the store of purchase or your nearest
Yamaha dealer (listed at the back of this manual).

2

The CRW3200E drive is not recognized by the operating system. (P. 22)

●

Is the IDE cable connected properly to the CRW3200E drive?

Turn off the computer and remove the computer cover. Check that the connector
of the IDE cable connected to the CRW3200E drive is in the correct direction,

and that the IDE cable is fully connected. (P. 9, 17)
Then check that the pins of the IDE interface connector of the CRW3200E drive

are not bent.

Refer to the YAMAHA CD-R/RW Drive website for the latest support data,
including information on troubleshooting.

YAMAHA CD-R/RW Drive website URL:

http://www.yamaha.co.jp/english/product/computer/

Europe:

http://www.yamaha-it.de/

«
...
34
35
36
37
38
...
»

Содержание CD Recordable/Rewritable Drive CRW3200



















































Отзывы:

Нет отзывов

Похожие инструкции для CD Recordable/Rewritable Drive CRW3200

AF-600 FP Series

Бренд: GE Страницы: 57

Бренд: NEC Display Solutions Страницы: 18

Бренд: RHINO MOTION CONTROLS Страницы: 10

Бренд: CENTENT Страницы: 48

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

PCDV5016 Series

Бренд: Philips Страницы: 1

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 20

Бренд: Philips Страницы: 42

LV-ROM LaserVision VP415

Бренд: Philips Страницы: 46

Бренд: Philips Страницы: 51

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды