Preparing the CRW3200E Drive
23
If the drive name is not shown or there is
or
mark.
The CRW3200E drive has not been recognized properly. Check the cable
connections and the master/slave settings of the IDE devices connected to
the computer.
When using Windows 2000 Professional
1
Select Start on the taskbar, then Settings, Control Panel, Hardware
tab, and Device manager. The Device Manager dialog box appears.
2
If there is
to the left of DVD/CD-ROM Drive, click
.
YAMAHA CRW3200E should be shown when the CRW3200E drive
has been recognized properly.
When using Windows XP
1
Select Start on the taskbar, then Control Panel, System, Hardware
tab, and Device manager. The Device Manager dialog box appears.
If the
System
icon is not found in the
Control Panel
window, click
Switch to Classic View
on the left side of the window.
2
If there is
to the left of DVD/CD-ROM Drive, click
.
YAMAHA CRW3200E should be shown when the CRW3200E drive
has been recognized properly.
3
Change the DMA setting.
The DMA setting may not be displayed, depending on your computer. In
such a case, you can use the CRW3200E drive without changing the
DMA setting.
Tip
To maximize the performance of the CRW3200E drive, Yamaha recommends
that you also change the DMA setting of your hard drive.
Note
