Yamaha CD Recordable/Rewritable Drive CRW3200 страница 20 Скачать руководство пользователя | Manualshive

Страница: 20 / 50

background image

12

• The CRW3200E drive is set at slave by default. If you connect the drive as the

sole secondary master, set the drive to master.

• If you connect an IDE device solely to an IDE cable, set the device to master and

connect the drive to the end of the cable.

• If you start up the operating system from a SCSI hard drive, etc., there may be no

IDE device connected to the primary. In such a case, Yamaha recommends that

the CRW3200E drive be connected as the primary master.

• You may find that the IDE cable has one connector when you try to connect the

removed device to another connector. In such a case, you are required to prepare

an IDE cable with two connectors.

• You may have to change the master/slave setting to connect the removed device

to another connector. For more details, refer to the documentation that comes

with the device or refer to the manufacturer’s website.

E-IDE

E-IDE (Enhanced-IDE) is a standard for connecting computers to IDE devices such

as hard discs, CD-ROMs and CD-R/RW drives. Most computers have two IDE

connectors (primary and secondary). Each connector can be connected to two

devices with an IDE cable.

Two IDE devices connected by one IDE cable are called “master” and “slave.”

Note

Slave

Master

Slave

Master

Motherboard

Primary

Secondary

Continued on next page

«
...
18
19
20
21
22
...
»

Содержание CD Recordable/Rewritable Drive CRW3200



















































Отзывы:

Нет отзывов

Похожие инструкции для CD Recordable/Rewritable Drive CRW3200

Бренд: Axis Страницы: 8

VLT HVAC FC 100

Бренд: Danfoss Страницы: 205

Бренд: Measurement Computing Страницы: 25

E MOTION Series

Бренд: Saci Страницы: 116

Бренд: Moeller Страницы: 221

Бренд: Injung Tech Страницы: 16

GD300-01A-011G-4

Бренд: INVT Страницы: 97

CFW-10 EASYDRIVE

Бренд: WEG Страницы: 93

Бренд: sauter Страницы: 8

Бренд: Vicon Страницы: 21

TPE 1000 Series

Бренд: Grundfos Страницы: 220

Бренд: ZIEHL-ABEGG Страницы: 44

Бренд: Vacon Страницы: 148

VLT AutomationDrive FC 360

Бренд: Danfoss Страницы: 31

Бренд: YASKAWA Страницы: 74

Gemini GT6 Series

Бренд: Parker Страницы: 81

Бренд: Danfoss Страницы: 26

CROUSE-HINDS ACE10 1

Бренд: Eaton Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды