![Yamaha CD-1330 Скачать руководство пользователя страница 9](http://html.mh-extra.com/html/yamaha/cd-1330/cd-1330_owners-manual_895928009.webp)
5
En
CONTROLS AND FUNCTIONS
Engl
ish
IN
TRO
DUCTI
O
N
■
Common
functions
This remote control can operate the system components
(including tuner functions) and an iPod stationed in a
terminal on the top of the receiver.
To operate the CD player, tuner functions, or an iPod
using the remote control, you need to set the receiver to
the corresponding input mode.
To switch the input mode of the receiver
Press the corresponding input selection key on the remote
control (or rotate INPUT on the front panel).
The name of the corresponding input source appears in the
front panel display of the receiver.
y
When CD or USB is selected as an input source, the CD
player turns on automatically and when other input source
is selected, the CD player sets to standby mode.
Operations common to all modes
The following operations are available for the receiver
when it is set to any input mode.
1
Infrared signal transmitter
Sends signals to the system you want to control.
2
(standby/on)
Turns the system on or sets it to the standby mode.
Even when the system is in standby mode, it consumes a small
amount of power in order to receive infrared-signals from the
remote control.
3
Input selection keys
Select the input source on the receiver.
4
PURE DIRECT
Turns on or off the Pure Direct mode (see page 12).
5
VOL +/–
Adjusts the overall volume level on the receiver.
6
TONE/BALANCE
/
Adjusts the audio quality (see page 12).
7
SLEEP
Sets the sleep timer on the system (see page 13).
8
MUTE
Turn off the volume (see page 12).
9
DIMMER
Changes the brightness of the front panel display (see
page 13).
Remote control
CD
iPod
FM/AM
PHONO
AUX
USB
PRESET
TUNING
MEMORY
Input
selection
keys
CD
iPod
FM/AM
PHONO
AUX
USB
PRESET
MENU
VOL
VOL
ENTER
TONE BALANCE
DISPLAY
DIMMER
SLEEP
RANDOM
REPEAT
MUTE
PURE DIRECT
TUNING
MEMORY
iPod MENU SEL
5
3
1
2
7
9
4
8
6
Note