17
En
Engl
ish
TUNER
OPERATIONS
There are 2 tuning methods: automatic and manual. Automatic tuning is effective when station signals are strong and
there is no interference. If the signal from the station you want to select is weak, tune into it manually. You can also use
the automatic and manual preset tuning features to store up to 30 stations.
Automatic tuning is effective when station signals are
strong and there is no interference.
1
Press FM/AM (or rotate INPUT on the front
panel) to set the receiver to the FM or AM mode.
2
Press and hold TUNING
/
for more
than 2 seconds to begin automatic tuning.
When the receiver is tuned into a station, the TUNED
indicator lights up and the frequency of the received
station is shown in the front panel display.
• Press
d
to tune into a lower frequency.
• Press
u
to tune into a higher frequency.
If the signal received from the station you want to select is
weak, tune into it manually.
1
Press FM/AM (or rotate INPUT on the front
panel) to set the receiver to the FM or AM mode.
2
Press TUNING
/
to tune into the
desired station manually.
Follow the procedure below to preset radio stations
automatically.
1
Press FM/AM (or rotate INPUT on the front
panel) to set the receiver to the FM mode.
2
Press and hold MEMORY for more than two
seconds.
The PRESET indicator flashes in the front panel
display and starts presetting stations automatically.
After searching all the frequencies, stops
automatically.
• Auto Preset starts at the lowest frequency toward
the highest frequency.
• The receiver automatically applies a preset number
to each detected station.
• To cancel, press MEMORY.
• You can preset up to 30 stations.
• Any stored station data existing under a preset station number is
cleared when you store a new station under the same preset
station number.
FM/AM TUNING
You may need to set the tuner frequency step according to the frequency spacing in your area. Press ON/STANDBY, OFF on the front
panel of the receiver while pressing and holding TUNER PRESET
d
on the front panel of the receiver to turn on the receiver. Each
time you set the tuner frequency spacing, the following setting switches.
• AM10/FM100: for Central and South America
• AM9/FM50: for all other areas (default)
For Asia and Central/South America models only
Automatic tuning
Manual tuning
CD
iPod
FM/AM
PHONO
AUX
USB
PRESET
RANDOM
REPEAT
TUNING
MEMORY
iPod MENU SEL
TUNING
/
FM/AM
Automatic preset tuning (FM only)
Notes
CD
iPod
FM/AM
PHONO
AUX
USB
PRESET
RANDOM
REPEAT
TUNING
MEMORY
iPod MENU SEL
FM/AM
MEMORY
