background image

n

Adjusting the perceived height of dialogue sound

Adjusts the perceived height of dialogue sounds when the position (height) of dialogue
sound is artificial. If the dialogue sounds as if it is coming from below the screen, you
can raise its perceived height by increasing this setting.

NOTE

This setting is available only when one of the following conditions is met.

▪ One of the sound programs (except for 2ch Stereo and 7ch Stereo) is selected when presence speakers

are used.

▪ Virtual Presence Speaker (VPS) is working.

(You may hear dialogue sounds from the surround speakers depending on the listening position.)

Option menu

“Dialogue” > “Dialogue Lift”

Setting range

0 to 5 (The bigger the value the higher the position)

Ideal position

 

Adjusting the delay of the Lipsync function

Adjusts the delay between video and audio output manually when “Delay Enable” in

the “Setup” menu is set to “Enable”.

Option menu

“Lipsync” > “Lipsync”

Setting range

0 ms to 500 ms (1 ms increments)

NOTE

 For details on “Delay Enable” in the “Setup” menu, see the following:

▪ “Enabling Lipsync adjustment” (p.117)

Setting Compressed Music Enhancer

Enables/disables Compressed Music Enhancer.

Option menu

“Enhancer” > “Enhancer”

Settings

Off

Disables Compressed Music Enhancer.

On

Enables Compressed Music Enhancer.

NOTE

▪ This setting is applied separately to each input source.
▪ You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer.
▪ For details on Compressed Music Enhancer, see the following:

– “Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)” (p.54)

 

 

En

98

Содержание AVENTAGE RX-A880












































































































































































































Отзывы: