Yamaha AVENTAGE RX-A880 Скачать руководство пользователя

Страница: 125 / 203

Adjusting the height volume balance using the

presence speakers for “7ch Stereo”

Adjusts the height volume balance using the presence speakers. Higher to enhance

the upside, and lower to enhance the downside. This setting is effective when “7ch
Stereo” is selected.

Setup menu

“Sound” > “7ch Stereo” > “Height Balance”

Setting range

0 to 10

NOTE

The presence speakers do not produce sounds when “Height Balance” is set to “0”.

Setting the use of Monaural Mix for “7ch Stereo”

Enables/disables monaural sound output. This setting is effective when “7ch Stereo” is
selected.

Setup menu

“Sound” > “7ch Stereo” > “Monaural Mix”

Settings

Off

Disables monaural sound output.

Enables monaural sound output.

Setting the dynamic range adjustment method

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and

DTS signals) playback.

Setup menu

“Sound” > “Dynamic Range”

Settings

Maximum

Produces audio without adjusting the dynamic range.

Standard

Optimizes the dynamic range for regular home use.

Minimum/Auto

Sets the dynamic range for clear sound even at night or at low volumes.
When playing back Dolby TrueHD signals, the dynamic range is

automatically adjusted based on the input signal information.

Setting the limit value of the volume

Sets the limit value of the volume adjusted by using such as VOLUME keys on the

remote control.

Setup menu

“Sound” > “Volume” > “Max Volume”

Setting range

-60.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB [20.5 to 95.5 (5.0 increments),
97.0]

NOTE

For details on the scale of the volume display (dB unit or numeric value), see the following:

▪ “Setting the scale of the volume display” (p.147)

125

Содержание AVENTAGE RX-A880












































































































































































































Результаты поиска

Содержание AVENTAGE RX-A880

Отзывы:

Похожие инструкции для AVENTAGE RX-A880

Бренды по названию

Популярные бренды

Yamaha AVENTAGE RX-A880, Руководство пользователя

Результаты поиска

Содержание AVENTAGE RX-A880

Отзывы:

Похожие инструкции для AVENTAGE RX-A880

Бренды по названию

Популярные бренды