Setting the use of Virtual CINEMA FRONT
Selects whether to use Virtual CINEMA FRONT.
NOTE
Select “On” only when utilizing the Virtual CINEMA FRONT configuration. For details, see the following:
▪ “Using Virtual CINEMA FRONT” (p.24)
Setup menu
“Speaker” > “Configuration” > “Virtual CINEMA FRONT”
Settings
Off
Disables Virtual CINEMA FRONT
On
Enables Virtual CINEMA FRONT
NOTE
This setting is not available when “Surround” is set to “None”. For details on “Surround” in the “Setup” menu,
see the following:
▪ “Setting the use of surround speakers and their size” (p.95)
Setting the distance between each speaker and the
listening position
Sets the distance between each speaker and the listening position so that sounds from
the speakers reach the listening position at the same time.
Setup menu
“Speaker” > “Distance”
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Presence L, Presence R, Subwoofer
Setting range
0.30 m to 24.00 m (1.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments
NOTE
Select the unit of distance from “Meter” or “Feet” in “Unit”.
Adjusting the volume of each speaker
Adjusts the volume of each speaker to suit your listening position.
Setup menu
“Speaker” > “Level”
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Presence L, Presence R, Subwoofer
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
NOTE
Test tone output helps you to adjust the speaker balance while confirming its effect. For details, see the
following:
▪ “Outputting test tones” (p.99)
En
98
