Setting input sources to be skipped when operating
the INPUT knob
Set which input sources are skipped when operating the INPUT knob.
You can select the desired input source quickly by using this function.
Setup menu
“Function” > “Input Skip”
Input sources
HDMI 1-4, AV 1-3, AUX, AUDIO 1-3, PHONO, TUNER, NET, Bluetooth, USB
Settings
Off
Does not skip the selected input source.
On
Skips the selected input source.
NOTE
When using AV CONTROLLER, you cannot select the input sources set to “On” in this function.
Adjusting the brightness of the front display
Adjusts the brightness of the front display.
Setup menu
“Function” > “Dimmer”
Setting range
-4 to 0 (higher to brighten)
NOTE
The front display may become dark when “ECO Mode” is set to “On”. For details, see the following:
▪ “Setting the use of the eco mode” (p.107)
Preventing accidental changes to the settings
Prevents accidental changes to the settings.
Setup menu
“Function” > “Memory Guard”
Settings
Off
Does not protect the settings.
On
Protects the settings until “Off” is selected.
NOTE
When “Memory Guard” is set to “On”, the lock icon (
o
) is displayed on the menu screen.
En
109