Using the WPS PIN code
If you select “PIN Code” as the connection method, the list of available access
points appears on the TV screen.
1
Use the cursor keys (
q
/
w
) to select the desired access point
and press ENTER.
The PIN code of the unit appears on the TV screen.
PIN Code
PIN Code : 00000000
Enter the PIN code
into the access point.
Press ENTER to start
the connection process.
Back
RETURN
2
Enter the unit’s PIN code into the wireless router (access
point).
For details on settings, refer to the instruction manual of the wireless
router (access point).
3
Press ENTER to start the connection process.
When the connection process finishes, “Completed” appears on the
TV screen.
If “Not connected” appears, repeat from step 1 or try another
connection method.
4
To exit from the menu, press SETUP.
Connecting a mobile device to the unit directly
(Wireless Direct)
Follow the procedure below to connect a mobile device to the unit directly.
Note
Wireless Direct connection may be insecure since the communication is not strongly encrypted. The unit may
operate by playback operation on wireless devices connected to the unit without permission.
1
Press
z
(receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display video from the
unit (HDMI OUT jack).
Note
Operations with TV screen are available only when your TV is connected to the unit via HDMI.
3
Press SETUP.
4
Use the cursor keys (
q
/
w
) to select “Network” and press ENTER.
5
Use the cursor keys (
q
/
w
) to select “Network Connection” and
press ENTER.
6
Use the cursor keys (
e
/
r
) to select “Wireless Direct” and press
ENTER.
Connection
<Wireless Direct>
Establish wireless
peer-to-peer connection
directly with device,
without going through
home network.
Cannot connect to internet.
Network Connection
Back
RETURN
En
39
