PREPARATIONS
➤
Optimizing the speaker settings automatically (YPAO)
En
56
2
Use the cursor keys to select an item.
3
To finish checking the results and return to the
previous screen, press RETURN.
Reloading the previous YPAO adjustments
When the speaker settings you have configured manually are not
suitable, follow the procedure below to discard the manual settings
and reload the previous YPAO adjustments.
1
In the “Setup” menu, select “Speaker”, “Auto
Setup”, and then “Result” (p.120).
2
Use the cursor keys to select “Setup Reload‘” and
press ENTER.
3
To exit from the menu, press ON SCREEN.
Wiring
Polarity of each speaker
Reverse:
The speaker cable may be connected with the
reverse polarity (+/-).
Size
Size of each speaker (cross-over frequency of the
subwoofer)
Large:
The speaker can reproduce low-frequency
signals effectively.
Small:
The speaker cannot reproduce low-frequency
signals effectively.
Distance
Distance from the listening position to each speaker
Level
Output level adjustment for each speaker
Angle
(Horizontal)
(RX-A3040 only)
Horizontal angle of each speaker at the listening
position
Height
(RX-A3040 only)
Height of the presence speakers above the level of the
listening position
ON
S
CREEN
ENTER
RETURN
1 2 3 4 5 6 7 8 9 10
Cursor keys
