En
171
Bluetooth
Problem
Cause
Remedy
A
Bluetooth
connection cannot be established.
The
Bluetooth
function of the unit is disabled.
Enable the
Bluetooth
function (p.147).
Another
Bluetooth
device is already connected to the unit.
Terminate the current
Bluetooth
connection and then establish a new connection
The unit and the
Bluetooth
device are too far apart.
Move the
Bluetooth
device closer to the unit.
There is a device (such as microwave oven and wireless LAN) that
outputs signals in the 2.4 GHz frequency band nearby.
Move the unit away from those devices.
The
Bluetooth
device does not support A2DP.
Use a
Bluetooth
device that supports A2DP.
The connection information registered on the
Bluetooth
device is
not working for some reason.
Delete the connection information on the
Bluetooth
device, and then establish a
connection between the
Bluetooth
device and the unit again (p.86).
No sound is produced, or the sound is
interrupted during playback.
The volume of the
Bluetooth
device is set too low.
Turn up the volume of the
Bluetooth
device.
The
Bluetooth
device is not set to send audio signals to the unit.
Switch the audio output of the
Bluetooth
device to the unit.
The
Bluetooth
connection has been terminated.
Establish a
Bluetooth
connection between the
Bluetooth
device and the unit again
The unit and the
Bluetooth
device are too far apart.
Move the
Bluetooth
device closer to the unit.
There is a device (such as microwave oven and wireless LAN) that
outputs signals in the 2.4 GHz frequency band nearby.
Move the unit away from those devices.