En
146
■
MAC Address Filter
Sets the MAC address filter to limit access to the unit from other network devices.
Enables/disables the MAC address filter.
Settings
• AirPlay (p.101) and DMC (p.122) operations are not subject to the MAC address filter.
Specifies the MAC addresses (up to 10) of the network devices that will be
permitted access to the unit when “Filter” is set to “On”.
■
Procedure
1
Use the cursor keys (
q
/
w
) to select “MAC Address 1–5” or “MAC Address
6–10” and press ENTER.
2
Use the cursor keys (
q
/
w
) to select an MAC address number and press
ENTER.
3
Use the cursor keys (
e
/
r
) to move the edit position and the cursor keys
(
q
/
w
) to select a value.
4
To confirm the setting, press ENTER.
5
To save the changes, use the cursor keys to select “OK” and press ENTER.
6
To exit from the menu, press ON SCREEN.
■
Network Name
Edits the network name (the unit’s name on the network) displayed on other network
devices.
■
Procedure
1
Press ENTER to enter the name edit screen.
2
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the
entry.
• To clear the entry, select “CLEAR”.
3
Use the cursor keys to select “OK” and press ENTER.
• To restore the default setting, select “RESET”.
4
To exit from the menu, press ON SCREEN.
Filter
Off
Disables the MAC address filter.
On
Enables the MAC address filter. In “MAC Address 1–10”, specify the
MAC addresses of the network devices that will be permitted access to
the unit.
MAC Address 1–10