En
121
Enables/disables the audio output from a TV connected to the HDMI OUT 1 jack or
HDMI OUT 2 jack.
Settings
• The HDMI OUT 1–2 jacks output 2-channel audio signals when the unit is turned on.
■
Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when the
unit is in standby mode. If this function is set to “On” or “Auto”, you can use the input
selection keys (AV 1–7 and V-AUX) to select an HDMI input even when the unit is in
standby mode (the standby indicator on the unit blinks).
Settings
Network
Configures the network settings.
■
Network Connection
Selects the network connection method.
Settings
■
IP Address
Configures the network parameters (such as IP address).
Select whether to use a DHCP server.
Settings
HDMI OUT1, HDMI OUT2
Off
Disables the audio output from the TV.
On
Enables the audio output from the TV.
Off
(This setting is available only when “HDMI Control” is set to “Off”.)
Does not output videos/audio to the TV.
On
Outputs videos/audio to the TV.
(The unit consumes more power than when “Off” is selected.)
Auto
Outputs videos/audio to the TV. If no signals are detected, the unit is
set to the power saving mode.
Wired
Select this option when you want to connect the unit to a network with a
commercially-available network cable (p.35)
Wireless (Wi-Fi)
Select this option when you want to connect the unit to a network via
the wireless router (access point). For details on settings, see
“Connecting the unit to a wireless network” (p.48).
Wireless Direct
Select this option when you want to connect a mobile device to the unit
directly. For details on settings, see “Connecting a mobile device to the
unit directly (Wireless Direct)” (p.54).
DHCP
Off
Does not use a DHCP server. Configure the network parameters
manually. For details, see “Manual network settings”.
On
Uses a DHCP server to automatically obtain the unit’s network
parameters (such as IP address).
