Yamaha Aventage MusicCast RX-A1070BL Скачать руководство пользователя | Manualshive

Страница: 158 / 172

background image

En

158

Error indications on the front display

Message

Cause

Remedy

Access denied

Access to the PC is denied.

Configure the sharing settings and select the unit as a device to which music contents are shared (p.85).

Access error

The unit cannot access the USB device.

Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.

There is a problem with the signal path from the network to the unit.

Make sure your router and modem are turned on.

Check the connection between the unit and your router (or hub) (p.39).

Check SP Wires

The speaker cables short circuit.

Twist the bare wires of the cables firmly and connect to the unit and speakers properly.

Internal Error

An internal error has occurred.

Contact the nearest authorized Yamaha dealer or service center.

No content

There are no playable files in the selected folder.

Select a folder that contains files supported by the unit.

No device

The unit cannot detect the USB device.

Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.

Please wait

The unit is preparing for connecting to the network.

Wait until the message disappears. If the message stays more than 3 minutes, turn off the unit and turn it on
again.

RemID Mismatch

The remote control IDs of the unit and the remote control are not
identical.

Change the remote control ID of the unit or the remote control (p.144).

Remote Off

The unit cannot be operated from remote control because the remote
control sensor on the main unit is turned off.

Use the controls on the front panel. To use the remote control, set “REMOTE SENSOR” in the “ADVANCED SETUP”
menu to “ON” (p.143).

Unable to play

The unit cannot play back the songs stored on the USB device for some
reasons.

Check the song data. If it cannot be played on another device, the song data may be defective.

The unit cannot play back the songs stored on the PC for some reason.

Check if the format of files you are trying to play is supported by the unit. For information about the formats
supported by the unit, see “Playing back music stored on media servers (PCs/NAS)” (p.85). If the unit supports
the file format, but still cannot play back any files, the network may be overloaded with heavy traffic.

Update failed.

Firmware update is failed.

Update the firmware again.

USB Overloaded

An overcurrent is flowing through the USB device.

Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.

Version error

Firmware update is failed.

Update the firmware again.

«
...
156
157
158
159
160
...
»

Содержание Aventage MusicCast RX-A1070BL













































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Aventage MusicCast RX-A1070BL

Бренд: Panasonic Страницы: 7

Бренд: Yamaha Страницы: 137

Бренд: Yamaha Страницы: 94

Radio Shack Realistic PRO-2021

Бренд: Tandy Страницы: 46

Бренд: Strong Страницы: 25

L-1DVI-FE-TX/RX

Бренд: Questtel Страницы: 4

Бренд: Insignia Страницы: 44

AMG3787E-1-DR-1550-HP

Бренд: AMG Страницы: 12

Бренд: Xtrend Страницы: 93

Бренд: Boss Audio Systemsu Страницы: 33

Бренд: tbs electronics Страницы: 15

Бренд: YBA DESIGN Страницы: 54

Бренд: Acesori Страницы: 2

Бренд: Olin Страницы: 14

Бренд: RIP TUNES Страницы: 31

Бренд: Harman Страницы: 16

BTR Evolution 5.1

Бренд: Oehlbach Страницы: 76

Tempco One H&C RF

Бренд: RADSON Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды