46 •
N3X
Owner’s Manual
Message List
* When an operation (such as saving or data transfer) is in process, the display shows a sequence of flashing dashes.
* Press any button to exit from these message displays.
Message
Descriptions
CLr
Displayed when the initialization (page 40) is completed.
con
Displayed when Musicsoft Downloader is started on a computer connected to the instrument. When
this message appears, you cannot operate the instrument.
E01
Displayed when the character code (page 33) is not appropriate for the file name of the Song which
you are selecting. Switch the character code.
Displayed when the data format is not compatible with this instrument, or the data has some other
problems. This Song cannot be selected.
Displayed when no USB flash drive can be found, or a problem has occurred in the USB flash drive.
Disconnect and connect the device again, then execute the operation. If this message appears
repeatedly even when there aren't any other likely problems, the USB flash drive may be damaged.
E02
Indicates that the USB flash drive is protected.
E03
Displayed when the memory of the USB flash drive becomes full, or the number of files and folders
exceeds the system limit.
E04
Displayed when Audio Song playback or recording has failed. If you are using a USB flash drive to
which data has already been stored or deleted a number of times, first make sure that the device
does not contain important data, then format it (page 37) and connect to the instrument again.
EE1
A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized dis-
tributor.
EEE
A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized dis-
tributor.
End
Displayed when the current operation is completed.
EnP
The memory of the instrument or the USB flash drive is running out. We recommend that you remove
any unnecessary files (page 39) to ensure sufficient memory capacity before start recording.
FUL
The operation could not be completed because the instrument’s internal memory or the USB flash
drive is nearly full. If this message is shown while recording, your performance data may not be cor-
rectly saved.
n Y
Confirms whether each operation is executed or not.
Pro
Displayed when you try to overwrite or delete a protected Song or read-only file. Use a read-only file
after cancelling the read-only setting.
UnF
Displayed when an unformatted USB flash drive is connected. First make sure that the device does
not contain important data, then format it (page 37).
Uoc
Communication with the USB flash drive has been shut down because of overcurrent to the USB
flash drive. Disconnect the USB flash drive from the [USB TO DEVICE] terminal, then turn on the
power of the instrument again.
UU1
Communication with the USB flash drive has failed. Remove the USB flash drive and make the con-
nection again. If the message appears even when the USB flash drive is connected properly, the USB
flash drive may be damaged.
UU2
This USB flash drive is not supported on this instrument, or too many USB flash drives may have
been connected. Refer to “About USB Flash Drives” (page 36) for information on the USB flash drive
connection.
Appendix
