Basic Operations and More
N3X
Owner’s Manual
• 29
You can fine-tune the pitch of the entire instrument. This function is useful when you play this instrument
along with other instruments or recorded music.
During the operation described below, you can check the Pitch
value shown on the display. (The hundreds place value has been
omitted.)
To tune up (in roughly 0.2Hz steps):
While holding down [FUNCTION], press [+]. Holding down both buttons shows the
current pitch setting (Hz).
To tune down (in roughly 0.2Hz steps):
While holding down [FUNCTION], press [-]. Holding down both buttons shows the
current pitch setting (Hz).
To restore standard pitch:
While holding down [FUNCTION], press [+] and [-] simultaneously. Holding down
all three buttons shows the current pitch setting (Hz).
Fine-tuning the Pitch
NOTE
The tuning value is retained even when the
power is turned off.
Hz (Hertz):
This unit of measurement refers to the fre-
quency of a sound and represents the num-
ber of times a sound wave vibrates in a
second.
Setting range: 414.8–466.8Hz (=A3)
Default setting: 440.0Hz (=A3)
42.0
Example: 442.0Hz
