N1
Owner’s Manual
•
31
Connections
Connectors
CAUTION
Before connecting the instrument to other electronic components, turn off the power to all the
components. Before turning the power on or off to all components, set all volume levels to
minimum (0). Otherwise, electrical shock or damage to the components may result.
q
AUX IN [L/L+R] [R] jacks
The stereo outputs from another instrument can be connected to these jacks,
allowing the sound of an external instrument to be reproduced via the N1’s
speakers. Refer to the diagram below and use audio cables to make the connec-
tions.
CAUTION
When the instrument’s AUX IN jacks are connected to an external device, first turn on the
power to the external device, then to the instrument. Reverse this order when you turn the
power off.
e
q
w
Refer to the “Panel Controls and Terminals” on page 8 for information
on the location of the connectors.
Rear
Front
(keyboard
side)
Use only the AUX IN [L/L+R] jack for con-
nection with a mono device.
AUX OUT
OUTPUT
AUX IN
AUX IN
audio cable
audio cable
phone plug
(standard)
phone plug
(standard)
phone plug
(standard)
phone plug
(standard)
Instrument
Tone Generator
