Playing the Keyboard
10
•
N1
Owner’s Manual
3
Turning the power on
Press the [
] power switch located on the right of the keyboard. This turns the power on, and the power indi-
cator located below the left end of the keyboard lights up.
A swirl graphic appears in the display located on the left of the keyboard and the instrument starts up when the
swirl in the display stops.
NOTICE
Do not press any keys until the instrument has completely started up (approx. eight seconds after turning on the switch).
Doing so may cause some keys to not sound normally.
4
Playing the keyboard
Play the keyboard to produce sound.
5
Turning the power off
Press the [
] power switch again. The power indicator turns off when the power turns off.
NOTICE
A small amount of electrical current remains even after the power switch is turned off. If you plan not to use the instrument
for a long period of time, be sure to unplug the instrument from the AC outlet.
6
Closing the fallboard
Grip the fallboard, and close it gently.
MAX
MIN
MASTER VOLUME
lights up
power switch
Adjusting the volume
While playing the keyboard, adjust the volume level by
using the [MASTER VOLUME] control located at the left
of the panel.
CAUTION
Do not use this instrument at a high volume level for a long period
of time, or your hearing may be damaged.
MAX
USB TO
MIN
MASTER VOLUME
The level
decreases.
The level
increases.
CAUTION
Be careful to avoid catching your fingers when closing the fallboard.