Yamaha Arius YDP-V240, Руководство пользователя

Страница: 99 / 152

Owner’s Manual
99
Saving and Loading Data
This operation saves a user song (song numbers 031–035) to USB flash memory.
1
Make sure that a properly formatted
USB flash memory has been properly
connected to the instrument’s USB TO
DEVICE terminal, and that the icon is
showing in the MAIN display.
2
Press the FILE CONTROL [MENU] but-
ton.
3
Use the CATEGORY [ ] and [ ] but-
tons to locate the User Song Save item.
The SOURCE FILE—a user song name—will
be highlighted.
4
Use the dial to select the source user
song.
You can press the [+] and [-] buttons simulta-
neously to select the first user song.
5
Press the [EXECUTE] button.
The DESTINATION SONG will be high-
lighted, and a default name will automatically
be created.
6
Press the [EXECUTE] button.
A cursor will appear below the first character in
the file name.
7
Change the file name as necessary.
Refer to “Saving Registration Memory data to
USB Flash Memory” on page 98 for filename
entry.
8
Press the [EXECUTE] button. The dis-
play prompts you for confirmation.
You can cancel the save operation at this point
by pressing the [-] button.
9
Press the [EXECUTE] button again, or
the [+] button, and the save operation
will begin.
The user song will be stored to the USER FILE
folder in the USB flash memory.
10
A message will appear on the display
to inform you that the operation has
finished.
Press the [EXIT] button to return to the MAIN
display.
Save a User Song to USB Flash Memory
●
To Overwrite an Existing File
If you want to overwrite a file that already exists
on the USB flash memory, use the dial or the
[+] and [-] buttons to select the file, then skip
ahead to step 7.
f
r
The source user song name.
The name of the file to
be saved Cursor
• Once the save-in-progress message appears on the display the
operation cannot be canceled. Never turn off the power or
remove the USB flash memory during this operation.
CAUTION
• If an existing filename is specified the display prompts you for confir-
mation. Press [EXECUTE] or [+] if it is OK to overwrite the file, or [-]
to cancel.
• The amount of time it will take to perform the save operation will
depend on the condition of the USB flash memory.
NOTE