Yamaha Arius YDP-S51, Справочное руководство

Страница: 4 / 8

YDP-S51 MIDI Reference
4
MIDI Data Format
MIDI Channel Message
○
: Can be transmitted and recognized.
△
: Cannot be transmitted by the panel operations,
but can be transmitted by song playback data.
×
: Cannot be transmitted or received.
MIDI Events
Status byte 1st Data byte 2nd Data byte
Transmitted Recognized
Status Data (HEX) Parameter Data (HEX) Parameter
Key Off 8nH (n: channel no.) kk Key no. (0 - 127) vv Velocity (0 - 127)
○ ○
Key On 9nH kk Key no. (0 - 127) vv Key On: vv = 1 - 127
Key Off: vv = 0
○ ○
Control Change BnH 0 (00H) Bank Select MSB 0 (00H) Normal
○ ○
32 (20H) Bank Select LSB 0 - 127 ○ ○
1 (01H) Modulation 0 - 127 (...7FH)
△ ○
6 (06H) Data Entry MSB 0 - 127 (...7FH)
△ ○
38 (26H) Data Entry LSB 0 - 127 (...7FH)
7 (07H) Main Volume 0 - 127 (...7FH)
○ ○
10 (0AH) Panpot 0 - 127 (...7FH)
△ ○
11 (0BH) Expression 0 - 127 (...7FH) △ ○
16 (10H) General Purpose Controller 1 0 - 127 (...7FH)
△ ○
64 (40H) Damper (Sustain) 0 - 127 (...7FH)
○ ○
66 (42H) Sostenuto 0 - 127 (...7FH)
○ ○
67 (43H) Soft Pedal 0 - 127 (...7FH)
○ ○
71 (47H) Harmonic Content 0 - 127 (...7FH)
△ ○
72 (48H) Release Time 0 - 127 (...7FH) △ ○
73 (49H) Attack Time 0 - 127 (...7FH)
△ ○
74 (4AH) Brightness 0 - 127 (...7FH)
△ ○
84 (54H) Portamento Control 0 - 127 (...7FH)
△ ○
91 (5BH) Effect1 Depth
(Reverb Send Level) 0 - 127 (...7FH)
○ ○
93 (5DH) Effect3 Depth
(Chorus Send Level) 0 - 127 (...7FH)
○ ○
96 (60H) Increment 0 - 127 (...7FH) △ ○
97 (61H) Decrement 0 - 127 (...7FH)
100 (64H) RPN LSB 0 - 127 (...7FH)
○ ○
101 (65H) RPN MSB 0 - 127 (...7FH)
Mode Message BnH 120 (78H) All Sound Off 0
△ ○
121 (79H) Reset All Controller 0
△ ○
122 (7AH) Local Control 0: OFF
7F: ON × ○
123 (7BH) All Note Off 0
△ ○
124 (7CH) OMNI OFF 0
× ○
125 (7DH) OMNI ON 0
× ○
126 (7EH) MONO 0 - 16 (...10H)
× ○
127 (7FH) POLY 0
× ○
Program Change CnH pp 0 - 127 – – ○ ○
Channel After
Touch DnH vv –
× ×
Polyphonic After
Touch AnH kk vv
△ ×
Pitch Bend Change EnH cc LSB dd MSB
△ ○
Realtime Message F8H MIDI Clock – –
○ ×
FAH Start – –
○ ○
FBH Continue – – × ×
FCH Stop – –
○ ○
FEH Active Sens – – ○ ○
FFH System Reset – –
× ×
Note
When an Overrun or Framing error occurs, the Damper, Sostenuto and Soft are set to off in all channels, and All Notes Off is executed.
ydps51_en_mr.book 4 ページ ２０１２年８月３１日 金曜日 午後２時１４分