Playing the Piano
19
YDP-165, YDP-145, YDP-S55, YDP-S35 Owner’s Manual
The metronome feature is convenient for practicing with an accurate tempo.
1.
Press [METRONOME] to start the Metronome.
2.
Press [METRONOME] to stop the Metronome.
Metronome setting
While holding down the [METRONOME], press one of the highlighted keys
(shown below) or [+R]/[−L] to set the Metronome parameter.
Voice confirmation of current Tempo value (in English)
While holding down [METRONOME], press the A-1 key (lowest key).
Adjusting the Tempo
The Metronome tempo can be set from 5 to 280 beats per minute.
•To increase or decrease the value by 1:
While holding down [METRONOME], press [+R] to increase or [−L] to decrease.
While the metronome is playing, press [+R] to increase or [−L] to decrease.
•To increase or decrease the value by 10:
While holding down [METRONOME], press the D2 key to increase or the C2 key
to decrease.
•To specify a numeric value:
While holding down [METRONOME], press the relevant C1 – A1 keys one by one
in order. Specifying three digits or releasing [METRONOME] after specifying one
or two digits will enter the value.
•Resetting the value to the default (120)
While holding down [METRONOME], press [+R] and [−L] simultaneously, or
press the C
#
2 key. While the metronome is playing, press [+R] and [−L]
simultaneously.
Selecting the Beat (time signature)
While holding down [METRONOME], press one of the F2 – A
#
2 keys.
The first beat is accented with a bell sound and the rest with clicks. Default
setting is 0 (F2). In this setting, clicks sound in all beats.
Adjusting the Volume
While holding down [METRONOME], press the B4 key to increase the volume
or the A4 key to decrease. To reset to the default setting, press the A
#
4 key while
holding down [METRONOME].
Using the Metronome
2
2
4
4
7
1 3
3
0
5 6
5
6
9
8 0
C1
A1 C2
(-10)
D2
(+10)
F2 G2 A2
A4 B4
G
#
2 A
#
2
Lowest key A-1
C
#
2 (Default: 120)
Adjusting
the Volume
Selecting the Beat
(time signature)
Adjusting
the Tempo
Confirming the
current Tempo
F
#
2
A
#
4 (Default: 7)
NOTE
A numeric value is read out
when a relevant key is
pressed.
If the entered value is outside
the setting range, it will be
ignored.
Setting range:
1 – 10
Default setting:
7 (A
#
4)
Key
Beat (time
signature)
F2
0 (no accent)
F
#
2
2
G2
3
G
#
2
4
A2
5
A
#
2
6
Содержание ARIUS YDP-145
Страница 45: ...45 ...
