AO8
7
DISASSEMBLY PROCEDURE
3.
3-1
Remove the front panel assembly. (See Procedure 2.)
3-2
Remove the two (2) screws marked [80]. The LED2
circuit board can then be removed. (Fig. 2)
4.
4-1
Remove the UNC card assembly. (See Procedure 1.)
4-2
Remove the front panel assembly. (See Procedure 2.)
4-3
Remove the seventeen (17) screws marked [430]. The top
panel can then be removed. (Fig. 2)
4-4
Remove the two (2) screws marked [100]. The PSB circuit
board can then be removed. (Fig. 2)
[470]
[500] x 32
[400]: Flat Head Screw 4.0x8 MFZN2BL (VA221200)
[450]: Oval Head Screw 4.0x8 MFZN2BL (VS153600)
[470]
[400]
[400]
[400]
1
2
3
4
5
6
7
8
Mount bracket
Mount bracket
Front panel assembly
UNC card assembly
Blank panel
Fig. 1
[452]: Oval Head Screw B4.0x8 MFZN2BL (V6221000)
[470]: Bonding Screw 3.0x6 MFZN2BL (VS863000)
[500]: Bonding Screw 3.0x6 MFZN2BL (VS863000)
[450]
[452]
Mount bracket
<Right Side View>
<Left Side View>
[450]
[452]
Mount bracket
1.
1-1
Remove the four (4) screws marked [470]. The UNC card
assembly can them be removed. (Fig. 1)
2.
2-1
Remove the UNC card assembly. (See Procedure 1.)
2-2
Remove the thirty-two (32) screws marked [500]. The
blank panel can then be removed. (Fig. 1)
2-3
Remove the six (6) screws marked [450]. Each mount
bracket can then be removed. (Fig. 1)
2-4
Remove the six (6) screws marked [400]. The front panel
assembly can then be removed. (Fig. 1)