Yamaha AG200FZ, Руководство пользователя

Страница: 24 / 84

INSTRUMENT AND CONTROL FUNCTIONS
4-9
1
2
3
4
5
6
7
8
9
2. Place the seat in the original posi-
tion, and then tighten the bolts.
3. Install the panels.
TIP
Make sure that the seat is properly se-
cured before riding.
EAU14842
Adjusting the shock absorber
assembly
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
NOTICE
ECA10101
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Adjust the spring preload as follows.
To increase the spring preload and
thereby harden the suspension, turn
the adjusting ring in direction (a). To de-
crease the spring preload and thereby
soften the suspension, turn the adjust-
ing ring in direction (b).
●
Align the appropriate notch in the
adjusting ring with the position in-
dicator on the shock absorber.
●
Use the special wrench included in
the owner’s tool kit to make the ad-
justment.
WARNING
EWA10221
This shock absorber assembly con-
tains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.
●
Do not tamper with or attempt to
1. Special wrench
2. Position indicator
Spring preload setting:
Minimum (soft):
1
Standard:
1
Maximum (hard):
5
1
2
(a)
(b)
1
2
3
4
5
✼✦✰✥✣✲✣ ✬