manualshive.com logo in svg

Yamaha A4000, Руководство пользователя

Поделиться
Скачать
Yamaha A4000 Скачать руководство пользователя страница 226

About the COMMANDS

226

Chapter 9 COMMAND 

• A5000/A4000

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 

MOVE

[COMMAND/EXIT] Button 

→

 Knob 1 to highlight display line 4

→

 Press Knob 2

Moves the samples assigned to a program to a sample bank, 
or the samples in a sample bank to another sample bank or 
program.

• This command can be used to combine two sample banks into one,

or consolidate all the samples in a program that was created with-
out using sample banks into a sample bank, etc.

[Operation]

1.

Select the Move Type.

2.

Select the program or sample bank to be moved.

3.

Select the destination program or sample bank.

4.

Press Knob 1 (EXEC) or Knob 5 (EXEC&CONT), and the move 
confirmation display will appear. Press Knob 5 (YES) to execute 
the move operation.

• If Knob 1 (EXEC) is used to execute the command, the display pre-

vious to the command menu will be recalled after execution has fin-
ished. If Knob 5 (EXEC&CONT) is used to execute the command,
the move display will be retained so you can continue and perform
further move operations.

Knob 1

[

Turn] Cursor

Positions the cursor.

[

Press] EXEC

Press this knob to call the move confirmation display.
Press Knob 5 (YES) to actually execute the move opera-
tion.

Knob 4

[

Turn] Move Type

Specifies what type of data is to be moved to what type of
destination, and how Easy Edit parameters are to be han-
dled.

[Range] Program

→

SampleBank,  

Program(Freeze)

→

SampleBank,  

SampleBank

→

Program,  

SampleBank(Freeze)

→

Program,  

SampleBank

→

SampleBank

•  Program

→

SampleBank ... All samples assigned

to the selected program (not including sample

banks or samples contained in sample banks)

are moved to the selected sample bank.

• Program(Freeze)

→

SampleBank ... After applying

the Easy Edit parameters to the samples

(Freeze — page 213), all samples assigned to

the selected program (not including sample

banks or samples contained in sample banks)

are moved to the selected sample bank.

• SampleBank

→

Program ... All samples contained

in the selected sample bank are removed from

the sample bank and assigned to the selected

program.

• SampleBank(Freeze)

→

Program ... After applying

the sample bank parameters to the samples it

contains (Freeze — page 213), all samples

contained in the selected sample bank are

removed from the sample bank and assigned

to the selected program.

•  SampleBank

→

SampleBank ... All samples con-

tained in the selected sample bank are moved

to a second selected sample bank.

Knob 5

[

Press] EXEC&CONT

Press this knob to call the move confirmation display.
Press Knob 5 (YES) to actually execute the move opera-
tion.

Knob 1

Same function as Cursor 

q

 (page 226).

Knob 2

[

Turn] From Program

Specifies the source program from which samples are to 
be moved. This parameter can be used when the Move 
Type is set to Program

→

SampleBank or Pro-

gram(Freeze)

→

SampleBank.

[Range] 001 — 128

Cursor 

q

Knob 1

Knob 2

Knob 3

Knob 4

Knob 5

Turn 
action

Cursor

—

—

Move Type

—

Press 
action

EXEC

—

—

—

EXEC&CONT

q

Cursor

Cursor 

w

Knob 1

Knob 2

Knob 3

Knob 4

Knob 5

Turn 
action

Cursor

From Program

From 

SampleBank

To Program

To 

SampleBank

Press 
action

EXEC

—

—

—

EXEC&CONT

w

Cursor

Содержание A4000









































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды