manualshive.com logo in svg

Yamaha A4000, Руководство пользователя

Amiga A4000 - мощный персональный компьютер с возможностью расширения, идеально подходящий для любителей игр и профессиональных пользователей. На нашем сайте вы можете бесплатно скачать руководство пользователя для Amiga A4000. Посетите manualshive.com, чтобы совершить загрузку.

Поделиться
Скачать
background image

About the COMMANDS

208

Chapter 9  COMMAND 

• A5000/A4000

 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 

DELETE

[COMMAND/EXIT] Button 

→

 

Knob 1 to highlight display line 1 

→

 Press Knob 3

Deletes all or specified samples (sample banks) or sequences 
in memory.

• Before executing the delete operation make sure the sample you

are deleting is not being used in a sample bank or program.

[Operation]

Delete the data as follows:

1.

Select the type of data to be copied via the Delete Type parameter.

2.

If the selected Delete Type is OneSample or OneSequence, also 
specify the sample or sequence to be deleted.

3.

Press Knob 1 (EXEC) or Knob 5 (EXEC&CONT), and the delete 
confirmation display will appear. Press Knob 5 (YES) to execute 
the delete operation.

• If Knob 1 (EXEC) is used to execute the command, the display

previous to the command menu will be recalled after execution
has finished. If Knob 5 (EXEC&CONT) is used to execute the
command, the delete display will be retained so you can con-
tinue and perform further delete operations.

Knob 1

[

Press] EXEC

Press this knob to call the delete confirmation display.
Press Knob 5 (YES) to actually execute the delete opera-
tion.

Knob 3

[

Turn] Delete Type

Specifies the type of data to be deleted.

[Range] OneSample,  AllSamples,  AllFreeSamples, 

OneSequence

• OneSample ... Allows a specified sample in mem-

ory to be deleted. Select the sample to be

deleted via Knob 5.

If a sample contained in a sample bank is

selected, a confirmation display asking if you

want to delete all other sample in that sample

bank will appear when the delete operation is

executed. Press Knob 5 (YES) to delete all

samples in the sample bank. If you press

Knob 4 (NO), the remaining samples are

removed from the sample bank, becoming

independent samples.

•  AllSamples ... All samples and sample banks in

memory are deleted.

• AllFreeSamples ... Deletes all samples and sam-

ple banks which are not currently used by a

program.

•  OneSequence ... Allows a specified sequence in

memory to be deleted. Select the sequence to

be deleted via Knob 5.

Knob 5

[

Turn] Sample/Sequence

Selects the sample or sequence to be deleted.
When the selected Delete Type is OneSample, Knob 5
selects the sample to be deleted.
When the selected Delete Type is OneSequence, Knob 5
selects the sequence to be deleted.
All samples (sample banks) and sequences in memory
can be selected.

[

Press] EXEC&CONT

Press this knob to call the delete confirmation display.
Press Knob 5 (YES) to actually execute the delete opera-
tion.

SAVE

[COMMAND/EXIT] Button 

→

 

Knob 1 to highlight display line 1 

→

 Press Knob 4.

Saves specified data in memory to disk.

[Operation]

1.

Specify the type of data to be saved via the Save Type parameter 
(page 209).

2.

Select the destination disk and volume (page 209).

3.

If the Save Type is OneProgram, specify the source program num-
ber and the destination program number (page 209). If the Save 
Type is OneSample or OneSequence select the sample (sample 
bank) or sequence to be saved (page 210).

4.

Press Knob 1 (EXEC) or Knob 5 (EXEC&CONT), and the save 
confirmation display will appear. Press Knob 5 (YES) to execute 
the save operation.

• If Knob 1 (EXEC) is used to execute the command, the display

previous to the command menu will be recalled after execution
has finished. If Knob 5 (EXEC&CONT) is used to execute the
command, the save display will be retained so you can con-
tinue and perform further save operations.

Knob 1

Knob 2

Knob 3

Knob 4

Knob 5

Turn 
action

—

—

Delete Type

—

Sample / 

Sequence

Press 
action

EXEC

—

—

—

EXEC&CONT

Содержание A4000









































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для A4000

GE Vivid q N Service Manual preview
Vivid q N
Бренд: GE Страницы: 698
h/p/cosmos 190/65 3p Original Instruction preview
190/65 3p
Бренд: h/p/cosmos Страницы: 81
tayco Cosmo Installation Manual preview
Cosmo
Бренд: tayco Страницы: 111
TANDBERG Model 5 Service Manual preview
Model 5
Бренд: TANDBERG Страницы: 23
Mackie Onyx Blackbird Owner'S Manual preview
Onyx Blackbird
Бренд: Mackie Страницы: 34
Mackworth SA400 Service Manual preview
SA400
Бренд: Mackworth Страницы: 38
P&P Rocker User Manual preview
Rocker
Бренд: P&P Страницы: 6
Barreto HT712 Operator'S Manual preview
HT712
Бренд: Barreto Страницы: 16
Panasonic EU7805K Operating Instructions Manual preview
EU7805K
Бренд: Panasonic Страницы: 23
JBL 54368 Instruction Manual preview
54368
Бренд: JBL Страницы: 17
Ametek Chandler Engineering 1910 Instruction Manual preview
Chandler Engineering 1910
Бренд: Ametek Страницы: 46
ORORO HEATED VEST Manual preview
HEATED VEST
Бренд: ORORO Страницы: 16
Frick IDSC Installation Operation & Maintenance preview
IDSC
Бренд: Frick Страницы: 36
Cooper IB520081ML Installation Instructions Manual preview
IB520081ML
Бренд: Cooper Страницы: 10
Korg HT-10 Owner'S Manual preview
HT-10
Бренд: Korg Страницы: 32
Nautilus Be strong NS 200X Owner'S Manual preview
Be strong NS 200X
Бренд: Nautilus Страницы: 27
ICON Health & Fitness WEIDER SHAPE GLIDER WECR43062 User Manual preview
WEIDER SHAPE GLIDER WECR43062
Бренд: ICON Health & Fitness Страницы: 6
Duracell 689314 Assembly And Installation Instructions preview
689314
Бренд: Duracell Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды