PLAYBACK
10
En
1
Rotate the VOLUME control on the front panel fully counter-clockwise
so as not to play sounds loud suddenly.
2
Press the
A
(power) button on the front panel (or press
A
(power) button
on the remote control) to turn on the unit.
3
Press the INPUT button on the front panel (or press the input selector
buttons on the remote control) to select LINE or USB.
The indicator for the selected input source lights up.
4
Play the selected input source.
5
Rotate the VOLUME control on the front panel (or press VOL +/– on the
remote control) to adjust the volume.
6
When finished listening, press
A
(power) button on the front panel (or
press
A
(power) button on the remote control) to set the unit to standby
mode.
PLAYBACK
Playing a source
VOLUME
INPUT
A
(Power)
Input selector buttons
VOL +/–
Auto power standby function
•
The auto power standby function will be activated as follows (default setting).
- The unit turn off automatically if no operation has been performed for more than 8 hours.
Activating/deactivating the auto power standby function
1 While pressing and holding
A
(power) on the unit, plug in the power cable to the
AC outlet.
2 Keep pressing
A
(power).
•
The auto power standby function switches and the power indicator blink as follows:
- Auto power standby function is activated: blink twice
- Auto power standby function is deactivated: blink once
