6
Initial Setting
The 6YC
Information Station
must be initial-
ized before its first use or after a reset oper-
ation.
TIP:
Consult a Yamaha dealer when you perform
the initial setting.
Configuring the number of outboard
motors
1. Turn the engine start switch to ON. The
“INITIAL SETTING” screen is displayed.
TIP:
For a twin engine application, turn the PORT
engine start switch to the ON position first.
The system will recognize the engine turned
on first as the PORT engine.
2. Use the [
LI
] (Up/Down) buttons on the
directional keypad to select the number
of outboard motors on your boat.
3. Set using the [SET] button.
4. The main screen is displayed.
1: Single-engine application
2: Twin-engine application
Initial Setting
00_6YC_owners_En.book Page 6 Sunday, March 1, 2015 3:36 PM
