17
BOAT
Specific selection area
It is possible to select the types of informa-
tion displayed in the specific selection area.
For details on how to customize the specific
selection area, see “Customizing the screen
(Favorites)” (page 23).
Adjusting the trolling speed
The “TROLL” main screen allows to adjust
the trolling speed. The trolling speed can be
adjusted randomly by increasing or decreas-
ing it in approximate steps of 50 r/min. In a
twin-engine application, the trolling speeds
of both engines are synchronized.
This function is not available for outboard
motors not equipped with a trolling speed ad-
justment function.
In order to switch to the trolling mode, all of
the following conditions must be satisfied.
• Engine running (shift-in).
• Throttle fully closed.
• “TROLL” selected as the main screen.
1. Select the “TROLL” main screen.
2. Press the [SET] button to switch to the
trolling mode.
TIP:
While the trolling mode is active, “TROLL” is
shown in the status bar in place of “VIEW”.
3. Use the [
LI
] (Up/Down) buttons of the
directional keypad to adjust the trolling
speed.
TIP:
• To increase the trolling speed, press the
[
L
] (Up) button.
• To decrease the trolling speed, press the
[
I
] (Down) button.
• When warming up a cold engine, the trol-
ling speed cannot be decreased below the
engine high idle speed during warm up.
• The trolling speed adjustment range de-
pends on the outboard motor model.
Main screen
00_6YC_owners_En.book Page 17 Sunday, March 1, 2015 3:36 PM
