Yamaha 5KM2-AE1, Руководство по обслуживанию

Страница: 286 / 431

7 - 13
DRIV
FRONT CONSTANT VELOCITY JOINTS AND
DIFFERENTIAL GEAR
*****************************************************
Installation steps:
●
Slide the shift fork sliding gear
1
, which is
installed to the differential gear, to the left to
put it into the 2WD mode.
●
Connect two C size batteries to the gear
motor terminal
2
to operate the pinion gear
3
, and operate it until the paint mark
4
on
the gear is aligned with the paint mark
5
on
the gear motor case.
CAUTION:
Do not use a 12 V battery to operate the
pinion gear.
●
Insert 8 mm bolts
6
into the gear motor
7
and use them as a guide to set the motor on
the differential gear assembly
8
so that the
shift fork sliding gear
9
does not move.
CAUTION:
If the position of the shift fork sliding gear
is moved, the position of the differential
gear and the indicator light display may dif-
fer, and the 2WD or differential lock mode
may not be activated.
●
Remove the 8 mm bolts, and then install the
motor with the gear motor bolts.
*****************************************************
T
R
.
.
Bolts (gear motor)
13 Nm (1.3 m • kg, 9.4 ft • lb)
3.Install:
●
Universal joint yoke
●
O-ring
●
Washer
●
Nut
Use a universal joint holder
1
.
Universal joint holder:
P/N. YM-04062, 90890-04062
LT
T
R
.
.
62 Nm (6.2 m • kg, 45 ft • lb)