73
Detailed Settings
Other settings — [FUNCTION]
Type of data:
Note, Control (Control Change), Program (Program Change), Pitch
Bend, SysEx (System Exclusive)
Setting range:
On/Off
Default setting:
On for all types of data
This parameter enables you to specify which MIDI data
the Clavinova can transmit.
Type of data:
Note, Control (Control Change), Program (Program Change), Pitch
Bend, SystemRealTime, SysEx (System Exclusive)
Setting range:
On/Off
Default setting:
On for all types of data
You can transmit the panel data, such as Voice selection,
to a connected sequencer. Before you record performance
data to a sequencer, it is useful if you first send and record
(at the beginning of the performance data) the panel
setup data for your performance during playback.
Press the B [+ (YES)] button to call up “Sure?->.” Press the
B [+ (YES)] button again to start actual transmission.
You can back up some settings, such as Voice selection
and metronome setting, so that they will not be lost after
you turn off the power to the Clavinova. Memory Songs
(saved in the Clavinova’s memory), the backup on/off
setting (this parameter setting), and the “CharacterCode”
parameter setting (page 48) are always backed up.
NOTICE
It takes a few seconds to save the settings. If you turn off the
power of the instrument right after changing the setting, the setting
may not be saved.
Setting for:
Transpose
Brilliance
ReverbOnOff
SoundSetting (for the I.A. Control and GP Soundboard Speaker)
SplitPoint
Main/LeftVoice
MetronomeSetting
File/SongSetting
MidiSetting (“MidiOutChannel” – “TransmitParameter” in the
Function settings)
Function (except for Transpose, SplitPoint and Midi settings).
Setting range:
On/Off
Default setting:
The Transpose, Main/LeftVoice, MetronomeSetting, and Function
parameters are set to Off. Other parameters are set to On.
You can reset the Clavinova to its factory default settings.
• The CharacterCode parameter setting does not change.
• The MemoryBackup parameter setting (On/Off) (left
column) is reset to the default setting.
• You can select whether the “Memory Songs” (Songs in
the MEMORY drive) are erased or kept.
NOTE
The “Default setting” refers to the initial setting preprogrammed
when shipped from the factory, called up when you first turn on the
power to this instrument.
NOTICE
Do not turn off the power during factory set. Doing so could result
in damage to the data.
Selecting the type of data transmitted
via MIDI
TransmitParameter
Transmitting the initial settings on
the panel
InitialSetup
ReceiveParameter
Note On
Select on or off.
Select a type of data.
TransmitParameter
Note On
Select on or off.
Select a type of data.
InitialSetup Start?_>
Start transmission.
Selecting items saved at shutdown
MemoryBackup
Restoring the factory default settings
FactorySet
MemoryBackup
Transpose Off
Select on or off.
Select the desired item.
