Using, Creating and Editing Songs
Recording Your Performance
CVP-409/407 Owner’s Manual
145
4
Start recording.
There are several different ways you can start recording.
• Starting by playing the keyboard
If you’ve selected the SONG [TRACK 1(R)]/[TRACK 2 (L)] buttons in step 3
above, play in the right-hand section of the keyboard (page 79). If you’ve
selected the SONG [EXTRA TRACKS (STYLES)] button in step 3 above,
play in the left-hand (chord) section of the keyboard (page 111). Record-
ing begins automatically as soon as you play a note on the keyboard.
• Starting by pressing the SONG [PLAY/PAUSE] button
If you start recording in this way, “empty” data is recorded until you play a
note on the keyboard. This is useful for starting a Song with a short one-or
two-beat pick-up or lead-in.
• Starting by pressing the STYLE CONTROL [START/STOP] button.
In this case the rhythm parts (channels) of the Style begin playing back and
recording starts simultaneously.
5
Press the SONG [STOP] button to stop recording.
When recording is finished, a message prompting you to save the recorded
performance data appears. To close the message, press the [EXIT] button.
See step 7 for instructions on saving your recording.
6
Listen to your newly recorded performance. Press the SONG [PLAY/
PAUSE] button to play back the performance you just recorded.
7
Press the [SONG SELECT] button to call up the Song Selection display
for saving your data, then save the data in the Song Selection display
(page 69).
Multi Track Recording
A Song consists of 16 separate channels. With this method, you can record data to
each channel independently, one by one. Both Keyboard and Style parts can be
recorded.
1
Press the SONG[REC] and
SONG[STOP] buttons simultaneously.
A blank Song (“New Song”) is called up
for recording.
Select Voices for recording the keyboard
parts (RIGHT 1, RIGHT 2, and/or LEFT)
(page 32, page 80, page 81). Select a Style
for recording also, as necessary (page 45).
Using the metronome
You can record your perfor-
mance while playing back the
metronome (page 30). But the
metronome sound is not
recorded.
Pausing and restarting your
recording
To pause recording, press the
SONG [PLAY/PAUSE] button
during recording. To restart
recording, follow the operations
shown below.
• For recording to [TRACK 1]/
[TRACK 2] recording, press the
SONG [PLAY/PAUSE] button.
• For recording to [EXTRA
TRACKS (STYLES)] recording,
press the STYLE CONTROL
[SYNC START] button, then
play in the chord section of the
keyboard.
CAUTION
The recorded Song data will
be lost if you select another
Song or turn the power to the
instrument off without exe-
cuting the Save operation
(page 69).
About Channels
Recording the keyboard RIGHT 2
part to the channel 2
Turn the PART ON/OFF [DUAL
(RIGHT2)] button on. Then, call up
Voice Selection display, and select a
voice for the RIGHT 2 part (page 80).
Example
Содержание 407
Страница 226: ...CVP 409 407 Owner s Manual 226 MEMO ...