Yamaha 407, Руководство пользователя

Страница: 140 / 232

Using, Creating and Editing Songs
Adjusting the Volume Balance and Voice Combination, etc. (MIXING CONSOLE)
CVP-409/407 Owner’s Manual 140
Adjusting the Volume Balance and
Voice Combination, etc. (MIXING
CONSOLE)
You can set the mixing-related parameters of a Song. Refer to the section “Adjust-
able items (parameters) in the MIXING CONSOLE display” on page 90. Call up the
“SONG CH 1–8” or “SONG CH 9–16” display in step 3 of the Basic Procedure in
“Editing the Volume Balance and Voice Combination (MIXING CONSOLE)” on
page 88. Below are two operation examples.
Adjusting the Volume Balance of Each Channel
1
Select a Song (page 35).
2
Press the [MIXING CONSOLE] button to call up the MIXING CON-
SOLE display.
3
Select the [VOL VOICE] tab by pressing the TAB [
√
][
®
] buttons.
4
Press the [MIXING CONSOLE] button repeatedly to call up the display
of “SONG CH 1–8” or “SONG CH 9–16.”
5
Press the [J] button to select the “VOLUME.”
6
Adjust the volume balance of each channel by using the [1
π π π π† † † †
]–
[8
π π π π† † † †
] buttons.
7
You can save the volume settings to the Song in the Setup operation
of the SETUP (page 162).
Make sure to checkmark the “VOLUME” item in step 2 of the Setup proce-
dure.
Reading Song data automatically when connecting a USB stor-
age device
You can have the instrument automatically call up the first Song (not con-
tained in a folder) on a USB storage device, as soon as the device is con-
nected in the [USB TO DEVICE] terminal.
1
Call up the operation display.
[FUNCTION]
→
[J] UTILITY
→
TAB [
√
][
®
] MEDIA
2
Press the [3
π π
π π
]/[4
π π
π π
] (SONG AUTO OPEN) button to select “ON”.
About the [SONG CH 1–8]/
[SONG CH 9–16] displays
A Song consists of 16 separate
channels. Separate settings can
be made for each of the 16 chan-
nels in the MIXING CONSOLE
display. Adjust the parameters in
the SONG CH 1–8 or SONG CH
9–16 display respectively. Usu-
ally, CH 1 is assigned to the
[TRACK 1] button, CH 2 is
assigned to the [TRACK 2] but-
ton, and CH 3–16 are assigned
to the [EXTRA TRACKS] button,
respectively.
Press the [C]/[H] (VOICE) but-
tons in step 5 to select the Voice
which you want to change. Then,
press one of the [1
π†
] to [8
π†
] buttons to call up the
Voice selection display for the
channel.