manualshive.com logo in svg

Yamaha 212SS 2016, Руководство владельца/оператора

Поделиться
Скачать
Yamaha 212SS 2016 Скачать руководство пользователя страница 80

Equipment operation

74

NOTICE

Do not modify the wakeboard tower to tow
from any other point or to carry accesso-
ries not designed for it. The wakeboard
tower could be damaged. Also, the wake-
board tower collapsing feature is intended
for storage only. The boat should not be
transported or operated with the tower in
the collapsed position.

Collapsing and setting up the 
wakeboard tower

When storing the boat, collapse the wake-
board tower.

NOTICE

●

Accidentally dropping the wakeboard
tower while collapsing or raising it can
damage the tower, the boat, or both. An
assistant needs to help hold the wake-
board tower in place during the proce-
dure.

●

Do not operate the boat or transport it on
the trailer with the tower in the collapsed
position to avoid possible damage.

To collapse the wakeboard tower:
(1) Remove wakeboards and any other ac-

cessories from the wakeboard racks.
Fold and secure the bimini top (if up).

(2) Remove the upper support knob and low-

er support knobs on the inner side of
each support pole.

1

Upper support knob

2

Support pole

3

Lower support knob

(3) While supporting the wakeboard tower,

remove the upper support knob and low-
er support knobs on the outer side of
each support pole, and then remove the
pole.

1

Wakeboard tower

2

Support pole

1

2

3

1

2

SportsBoat_F2J15.book  Page 74  Monday, May 18, 2015  6:25 PM

Содержание 212SS 2016

































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды